Brew Box 2.0 / How to Deep Clean the Milk Dispenser

When it comes to the cleaning of your Brew Box, it should only be done by those who have undergone training by the staff at Barista & Co. This will ensure the process is done thoroughly and safely.

 

The milk deep clean process should be performed weekly. To start, take the milk out of the fridge and give the inside a wipe down with a damp cloth.

 

Hold down the middle sensor icon for 3 seconds to bring up the Settings Menu. Press the Service Menu icon which will take you to the next screen.

 

The Brew Box will ask for a password at this stage. Simply type in the following 4-digit number: 1609.

 

Once the password has been inputted correctly, the service menu will appear. Select the Maintenance option which appears at the top of the list. Select Milk Deep Clean on the next screen and press OK.

 

Fill a jug with 500ml of water and place 50ml of cleaning solution into the mix. Put the jug into the milk fridge with the tube inserted into the solution. Close the door and press OK on the main screen.

 

The machine will then start the deep cleaning cycle. This process takes about 15 minutes. Once this stage has finished, take out the jug containing the cleaning solution and fill with fresh water.

 

Place the jug back into the fridge, close the door and press OK.

 

The machine will then start the 2nd stage, rinsing through with the fresh water. This process takes about 3 minutes. When complete, take out the jug and press OK to return to the homepage.

 

Put in some fresh milk in and enjoy your coffee.